InteliGen NTC BaseBox

Order code: IG-NTC-BB

New version of this product is available. Check out its successor, InteliGen 1000

Upcoming training: 14.8.2025. Find out more.

InteliGen NTC BaseBox is a controller with a broad range of communication capabilities for single or multiple diesel gen-sets operating in stand-by or parallel mode. Intended primarily for switchgear applications, this controller will ensure secure on-site and remote monitoring of your critical infrastructure installations such as datacentres, hospitals or banks. The InteliGen NTC BaseBox is one of the earlier versions of our advanced controller InteliGen 1000.

This controller also has a certified version for marine applications. Learn more: InteliGen NTC BaseBox GeCon Marine

Built-in PLC interpreter
Remote connection & monitoring
Controller redundancy
User defined protections and setpoints
True RMS measurement
Broad communication capabilities

InteliGen NTC BaseBox Datasheet

996 KB

English (29 Mar 2023)

English

996 KB 29 Mar 2023

Polish

1.09 MB 29 Mar 2023

Manuals

25 files

30.61 MB

English (31 Oct 2024)

1.75 MB

English (25 Jan 2023)

770 KB

English (25 Jan 2023)

354 KB

English (25 Jan 2023)

109 KB

English (28 Feb 2025)

1.17 MB

English (6 Jun 2025)

4.21 MB

English (2 Oct 2023)

10.34 MB

English (13 Mar 2025)

747 KB

English (25 Jan 2023)

483 KB

English (25 Jan 2023)

576 KB

English (25 Jan 2023)

51.63 MB

English (28 Feb 2025)

330 KB

English (25 Jan 2023)

2.98 MB

English (25 Jan 2023)

13.15 MB

English (30 Nov 2023)

7.89 MB

English (28 Feb 2025)

449 KB

English (16 Oct 2024)

2.79 MB

English (16 Oct 2024)

492 KB

English (25 Jan 2023)

51.85 MB

English (16 Oct 2024)

2.19 MB

English (25 Jan 2023)

4.88 MB

English (16 Oct 2024)

5 MB

English (25 Jan 2023)

2.82 MB

English (16 Oct 2024)

289 KB

English (25 Jan 2023)

Software

13 files

29.04 MB

(6 Jun 2025)

4.25 MB

(13 Jun 2023)

108.26 MB

(6 Mar 2025)

364 KB

(25 Jan 2023)

61.04 MB

(25 Jan 2023)

14.01 MB

(25 Jan 2023)

17.56 MB

(25 Jan 2023)

50.03 MB

(25 Jan 2023)

38.42 MB

(25 Jan 2023)

38.04 MB

(11 Oct 2024)

203.16 MB

(15 Oct 2024)

11.75 MB

(11 Oct 2024)

28.71 MB

(20 Oct 2023)

Certifications

10 files

CE for IG-IS-IM Controllers

628 KB

English (3 Feb 2023)

CRS_Certificate_IGSM_03-001887_2026

468 KB

English (25 Jan 2023)

518 KB

English (25 Jan 2023)

IGS-NT Marine Certificate of Design Assessment of American Bureau of Shipping (ABS)

899 KB

English (25 Jan 2023)

IGS-NT Marine Type Approval Certificate Bureau Veritas

580 KB

English (25 Jan 2023)

IGS-NT Marine Type Approval Certificate Lloyds Register (LR)

512 KB

English (25 Jan 2023)

IGS-NT Marine Type Approval Certificate of Det Norske Veritas Germanischer Lloyd (DNV-GL)

277 KB

English (25 Jan 2023)

Korean Register Marine Type Approval Certificate

316 KB

English (25 Jan 2023)

Marine Type approvals with products

351 KB

English (19 May 2023)

UKCA InteliGen NT BB Declaration of Conformity v1

605 KB

English (25 Jan 2023)

Brochures

2 files

5.12 MB

English (25 Jan 2023)

Make Your Equipment Less Remote

2.46 MB

English (25 Jan 2023)

48 KB

English (8 Feb 2023)

Show resource hub for this product

Overview
Related products
FAQ
Training

Overview
Related products
FAQ
Training

InteliGen NTC BaseBox

Control your operations safely and easily with our InteliGen NTC BaseBox controller, ensuring greater safety, user protection and minimal downtime.

The InteliGen NTC BaseBox offers:

AirGate ComAp’s controllers incorporate AirGate connection technology to make access to the internet as simple as possible. AirGate enables our controllers to connect to the internet using the existing network infrastructure, negotiating firewalls and VPN systems and removing the requirement for static and public IP addresses. 2.0 technology for easy connection to your equipment remotely, without worrying for about your asset’s IP address
Built-in PLC ComAp has integrated Programable Logic Controller tightly with our standard line of controllers. This helps our customers to cut costs, minimise points of failure for advanced systems, and overcome any challenge that may occur.interpreter with the use of ComAp's free PLC Editor
User-defined protections and setpoints on top of default protection
Controller redundancyRedundancy in critical backup power systems is essential to ensure that the power is never compromised. Our controllers allow for installing a second controller to continuously monitor for potential failure. minimising solution downtime and ensuring the power isn’t compromised
More precise measuring with a True Root Mean Square measurement feature
Remote control and monitoring of your gen-set operations with WebSupervisor, our cloud-based fleet management tool
Compatible load/Var sharing and power managementOur system allows for up to 32 generators running in parallel, regardless of whether the generators are of different sizes, power outputs, and from different manufactures. The system is highly adaptive and can create up to 4 different schemes of power management that can be switched with a simple switch. with other ComAp solutions*
Droop regulation allowing load and Var sharing when the inter-controller’s communication is lost
Start-up synchronisation ComAp’s Start-up synchronisation eliminates any blackout time, and the start-up time is the same for sites running 2, 10, or even 30 gen-sets. To avoid delaying availability of the system due to slow-starting generators or other problems, any engines that fail to reach running speed with a specified time are rejected from the scheme and, if able, are left to perform traditional synchronising after the majority of sets have become available. to minimise the paralleling start sequence time and get the gen-set system up and running with the minimum possible delay
Dynamic spinning reserveDynamic Spinning Reserve allows the system to react flexibly to changes in power produced by renewable energy sources. ComAp controllers can react to requested spinning reserve and keep the sufficient amount of gen-sets running to cover the drop-in output of the renewable source (e.g. when cloud cover is heavier). helping to deliver maximum amount of available energy from photovoltaics **
Faster and cost-effective operations with signal sharing over a CAN bus across a group of control units
Possibility to have a mains application in a gen-set controller with firmware upload functions
Event-based history for fast and easy troubleshooting
Automatic Mains Failure that ensures automatic start of gen-sets and minimises downtime
Peak shaving for limiting the import from the mains (e.g. due to higher prices)
Load shedding ensuring the most important loads are running even when there is a lack of power
Compatible with the following remote displays: InteliVision 5, InteliVision 8, InteliVision 12Touch, or InteliVision 18Touch

* Feature available with a hardware dongle.

** Feature available with a software key.

InteliGen NTC BaseBox GeCon Marine

Reliable marine-certified generator and gen-set controller with a variety of communication options, supporting simple and complex marine applications that can be controlled and monitored both remotely and on-site.

The InteliGen NTC BaseBox GeCon Marine offers:

Main functions: AMF function, Baseload, Import / Export, Peak shaving, Voltage and PF control (AVR)
Faster and cost-effective operations with signal sharing over a CAN bus
Broad communication capabilities: Ethernet connection (RJ45), USB 2.0, RS232/ RS485 interface with Modbus protocol support; Analog / GSM / ISDN / CDMA modem communication support; SMS messages; ECU Modbus interface; isolated secondary RS485
AirGateComAp’s controllers incorporate AirGate connection technology to make access to the internet as simple as possible.
AirGate enables our controllers to connect to the internet using the existing network infrastructure, negotiating firewalls and VPN systems and removing the requirement for static and public IP addresses.

technology for easy connection to your equipment remotely, without worrying for about your asset’s IP address
Automatic synchronisation and power control via speed governor or ECU
Measurement of both generator and mains side
Configurable inputs and outputs enabling customers to design functions according to their various needs
Bi-polar binary outputs
Event-based history for fast and easy troubleshooting
Controller redundancyRedundancy in critical backup power systems is essential to ensure that the power is never compromised. Our controllers allow for installing a second controller to continuously monitor for potential failure. minimising solution downtime and ensuring the power isn’t compromised
Integrated PLC programmable functions
Embedded fixed and configurable generator protection
Easy customisation of the firmware solution according to your requirements
Recommended to use with external colour displays InteliVision 8 or InteliVision 5
The controller has been certified by the following marine organisations: DNV, LR, ABS, BV, RINA, CRS, CCS

To run the GeCon software you need to order InteliGen NTC BaseBox, and then install the correct GeCon software:

GeCon LandBased (included in standard firmware)
GeCon Marine (special dedicated marine firmware)
IGS-NT-LSM+PMS dongle (required for Load sharing and Power Management)

Accessories

IGL-RA15

Upgraded version of Remote Annunciator with new ComAp design and full NFPA 110 compliance. Designed as an extension signaling unit for ComAp products.

I-CB/CAT DIESEL

ECU serial communication interface for Caterpillar Diesel engines equipped with EMCP2 controller and CCM or PL1000 communication module. This product supports ComAp’s InteliGen NT, InteliSys NT and Drive controllers to control and monitor Caterpillar Diesel engines.

IG-MTU-2-1

Mains Transformer Unit.

InteliVision 18Touch

Get a comprehensive overview of your complex operations for any application with the InteliVision 18Touch remote display. Easy to install, configure and use, this 18,5“colour touchscreen display unit will support the control and monitoring of sites with multiple controllers and complex installations, such as CHP or Hybrid that have a large number of values that need to be measured. The InteliVision 18Touch comes with embedded PC Scada software enabling users to freely configure their screen with different types of items such as meters, bar graphs, numeric values, control buttons, pictures, etc.

IGS-NT-LSM+PMS

Hardware key for Load Sharing and Power Management.

I-RB16

16 Relay board.

I-CB/MTU

ECU communication interface for MTU engines with ADEC and MDEC ECUs.

I-CR

CAN repeater module for inter-controller CAN, helping to increase controller communication reliability on sites with large footprint.

IG-AVRi-TRANS/LV

Power Supply Transformer for IG-AVRi module.

InteliVision 5

InteliVision 5 is an easy-to-use industrial operator panel with a colour screen for monitoring of single gen-set for various applications. This robust and intuitive plug&play solution provides comprehensive visual overview of all engine data, monitoring information and trend history.

I-RB8

8-Relay board for ComAp controllers.

InteliGen NTC MultiKit

Simulator of Multiple Genset Applications with Paralleling Gen-set Controllers and Color Displays.

GenConfig

GenConfig is an intuitive software tool that enables quick and effective configuration and programming of IG/IS-NT controllers.

Inteli AIN8

Module with 8 analogue Input channels and 1 RPM/Impulse Input.

IS-BIN16/8

Binary Input/Output module.

I-AOUT8

Analogue output module.

I-CR-R

CAN redundancy module for inter-controller CAN, helping to increase controller communication reliability on sites with large footprint.

InternetBridge-NT 4G

Communication module for internet connection to one or more controllers. This module enables remote communication for asset monitoring via both wired and wireless connection.

WebSupervisor

WebSupervisor is a cloud-based system designed for monitoring, data analysing and management of ComAp and third-party devices. It provides you with an easy overview of all your devices, their operational status, location and other important data, and alerts you in case of potential issues. Using its powerful reporting and analysis tools, you can optimise the revenue for your gen-set fleet, minimise downtime and reduce maintenance costs.

Inteli IO8/8

Binary Inputs/Outputs and analogue Outputs module.

IG-AVRi

AVR control Interface for paralleling genset controllers.

I-LB+

Communication bridge for local monitoring and control of multiple controllers. This module enables easy and smooth commissioning and maintenance of a group of gen-set controllers by linking data from all controllers into the configuration/monitoring software tool.

InteliMonitor

InteliMonitor is an online monitoring and controlling software tool for ComAp devices and accessories that can be used for unlimited number of sites. The tool provides auto-generated SCADA to help you gain detailed overview of your site and gen-set operations.

Inteli AIN8TC

Peripheral module, extension module - 8 thermocouples inputs.

IS-AIN8

Analogue input module.

Inteli AIO9/1

Analogue Input/Output module.

I-CB/Deutz TEME

ECU communication interface for MWM (former Deutz) engines equipped with TEMevolution ECUs. This product supports ComAp’s InteliGen NT, InteliSys NT and Drive controllers to control and monitor MWM engines.

IG-MTU

Mains Transformer Unit.

IGS-PTM

Analogue/binary Input/Output module.

I-CB/CAT GAS

ECU serial communication interface for Caterpillar Gas engines, equipped with EMCP2 controller and CCM or PL1000 communication module. This product supports ComAp’s InteliGen NT, InteliSys NT and Drive controllers to control and monitor Caterpillar’s Gas engines.

InteliVision 8

InteliVision 8, industrial operator panel equipped with 8” colour screen, is designed to support the monitoring and control of single gen-sets’ operations for various applications. A simple and easy-to-use plug&play solution, it provides comprehensive overview of all engine data, monitoring information and trend history. The InteliVision 8 is intended for the ComAp InteliGen NT, InteSys NT, InteliMains and InteliDrive family of controllers.

InteliVision 12Touch

Intuitive, easy-to-use and simple to configure, the InteliVision 12Touch is an industrial operator panel equipped with 12.1” colour, multi-touch screen. Compatible with the majority of ComAp’s controllers, it provides comprehensive visual overview to monitor and control single gen-sets for various applications.

I-LBA

Low battery adaptor to support controller operation during battery voltage dips.

NT-Converter

Load sharing interface module.

WinScope

WinScope is a high-performance PC tool used for monitoring and archiving trends. The tool enables quick and easy adjusting of setpoints to achieve optimal functionality and maximum performance of your gen-set. WinScope 1000 is available and can work in demo mode, free basic mode or paid advanced version, which can monitor up to 32 controllers and channels. WinScope 1000 is the newest generation of our WinScope tool.

Alternative products

InteliGen NT

InteliGen NT GC is a controller for single or multiple diesel gen-sets operating in stand-by or parallel mode. This controller will help you control, monitor and ensure the back-up power for medium sized sites, as well as rental applications. The InteliGen NT GC is an earlier generation controller of our InteliGen 500 G2.

InteliGen NTC

InteliGen NTC GC is a controller with a broad range of communication capabilities for single or multiple diesel gen-sets operating in stand-by or parallel mode. This product will help you ensure the back-up power for medium sized sites, as well as rental applications. The InteliGen NTC GC is an earlier generation of our InteliGen 500 G2 controller.

InteliGen NT BaseBox

InteliGen NT BaseBox is a controller for single or multiple diesel gen-sets operating in stand-by or parallel mode. Intended primarily for switchgear applications, this controller will ensure secure remote monitoring of your critical infrastructure installations such as datacentres, hospitals or banks. The InteliGen NT BaseBox is an earlier generation controller of our advanced InteliGen 1000.

InteliSys NTC BaseBox

InteliSys NTC BaseBox is a controller with a broad range of communication and PLC capabilities for single or multiple gen-sets operating in stand-by or parallel mode. Intended primarily for CHP and switchgear applications, it will help you with secure on-site and remote monitoring of various installations such micro CHP, datacentres, hospitals or banks.

InteliSys NTC Hybrid

InteliSys NTC Hybrid is a controller for hybrid microgrid applications, supporting the combination of renewable energy sources with gen-sets. The controller can be used for both on-grid and off-grid applications to help optimise the use of renewable energy and reduce your carbon footprint.

Substitute of

InteliGen 1000

InteliGen 1000 is the most advanced ComAp gen-set controller for multiple gen-sets with paralleling operations, with or without connection to the mains or other source. Intended primarily for switchgear applications, this high-end controller will help you control and monitor demanding projects with critical infrastructures such as datacentres, hospitals and banks.

Frequently Asked Questions

Show all

Can I unlock my controller?

If you have forgotten your controller password, it can be found using the password decode function.

You will need the following information about your device:

serial number
"password decode" number

Both numbers can be obtained through the monitoring software relevant to the device.

Serial number is available in Controller info
Password decode number is available in Values / Info

You can also show these numbers on your device's display. Typically, this requires a sequence or combination of buttons to be pressed. Details can be found typically in the device Operator guide.

Once you have these numbers, please contact your ComAp distributor and they will help you get your password back.

I cannot program my controller, it looks dead. How do I restore a controller with broken firmware?

The controller firmware does not usually break by itself however it can be damaged during controller programming, typically if power is lost during the process. If there does not seem to be a hardware issue with the controller there is an option to restore the controller using a process called ‘Boot Jumper’ programming.

This can be described as a sequence of steps you need to perform to allow the configuration tool to write new firmware into the device.

The steps typically are:

Physically connect the controller to your PC.
Power the controller on and initiate connection and firmware programming from the software tool menu.
The software will ask you to switch the device off, close the Boot Jumper and switch the device back on.
The programming will then proceed and you will receive further instructions during the process.

The boot jumper can be found either on the communication module (where plug-in modules are used) or on the device itself, typically under a rubber grommet, next to the dongle slot.

The description above is not enough? Try our Booot jumper training video.

How do I connect to my ComAp controller? What types of connections are supported?

ComAp offers a wide range of options to connect to your controller:

RS232 / RS485
USB - USB A<->B (usually a printer cable)
Internet connection - LAN, GPRS, 3G, 4G

Note that some connection types require you to use a communication module (plug-in eg a RS232 card) or communication bridge (external device eg Internet Bridge NT).

Each ComAp device usually allows for multiple ways of connection. The simplest one supported by the majority of our devices is the RS232 (serial) connection. For this, you need an RS232 cable (null modem) and if your PC is not equipped with an RS232 port you need a USB<->RS232 converter.
USB connections are very common. Almost all ComAp devices support connection using simple USB A<->B cable (printer cable) for easy configuration. Some devices can be powered from the USB port for programming to allow easy configuration right on your desk.
Other connection types: Internet connection (LAN, GPRS, 3G, 4G), Modbus RTU, Modbus TCP, SNMP, AirGate, Modem.
Note that some connection types require you to use a communication module (plug-in eg a RS232 card) or communication bridge (external device eg Internet Bridge NT). Not all types of connection are possible on each device. You can find all the details related to this topic in your device's Comprehensive guide or Communication guide.

Detailed information about connection to:
InteliLite NT, InteliATS NT, InteliCompact NT is available IL-NT, IA-NT, IC-NT Communication Guide (page 21)
InteliGen-NT, InteliSys-NT, InteliMains-NT is available in IGS-NT Communication Guide (page 19)
InteliLite is available in Global Guide InteliLite AMF25 Global Guide (page 126)

I cannot connect to my controller using the Internet or AirGate connection, why?

Usually connecting to the controller over the internet is straightforward and works out of the box. However, there are a few parameters that need to be set correctly.

Make sure you have the latest firmware in the controller itself but also in all the communication modules (plug-in, built-in or external).
- Communication modules that supports connection via the internet
  - CM-4G-GPS
  - CM-Ethernet
  - CM-GPRS
  - InternetBridge-NT 4G
  - InternetBridge-NT
  - IB-Lite
  - IB-COM (Built-in communication module for NTC controllers)
  - IL-NT GPRS

Ensure the communication interface is configured correctly.
- CM-4G-GPS, CM-Ethernet, CM-GPRS - Can be set in the controllers setpoints on the unit itself or using InteliConfig configuration software.
- IB-COM, IB-Lite - Use web interface - just connect to http://<controller-ip-address>/sp_index.htm using your favourite web browser.
- InternetBridge-NT 4G, InternetBridge-NT - Requires a software tool called IBNTConfig(https://www.comap-control.com/products/detail/ib-nt-config) and an USB A<->B cable for configuration. This way you can also enable MODBUS, SNMP etc.

Make sure there is no firewall blocking your connection. Consult your IT specialist or ISP if not sure. If you use a firewall, make sure the following ports are open for communication:
- The device must be able to send data to the AirGate server at UDP port 6127 and TCP port 23. The TCP port can be changed in the module setup to 21 if needed.
- TCP port 44445 is required for WebSupervisor connection.
- Port 80 is used for accessing the communication module web interface.
- Port 502 is used for Modbus TCP communication (enabled by default).
- Port 161 is used for SNMP (needs to be enabled).

How do I change the controller firmware? Where can I get the latest firmware?

You can download the latest firmware package on the webpage of the device. You can easily navigate there through the ‘Products’ section or just use the Search function. If you cannot find the firmware on the website or if you require different than the offered version do not hesitate to contact our support team.

The firmware upgrade itself is easy to perform. You need the appropriate configuration software and a connection to the controller (preferably a direct connection). Prior to initiating the update process, we strongly recommend you to save a complete backup of your device.

It usually consists of several steps:

Create a controller back up.
Update the device firmware. It will contain default Configuration Archive and default Application.
Change the Application (SPtM, MiNT, MCB, MGCB, BTB, etc) to the required type (by programming appropriate default archive to the controller).
Use the Import Configuration Wizard to restore your previous configuration. In some cases manual interventions might be needed during this step.
Optional: Update the connected display firmware or device communication module firmware.

Should you be unsuccessful in programming the new version, the rollback procedure is to install previous firmware version and use your back up to restore the controller to its original state before the firmware upgrade was attempted.

Upcoming trainings

2 days 2 / 6 spots left

Melbourne

English

Power Generation

Paralleling Gen-set Controllers Training

Location: Melbourne

Training fee: 960 AUD per person, excluding GST

Capacity: 6 participants

The Paralleling Gen-set Controllers training takes a comprehensive approach, addressing complex configurations involving multiple generators in island or parallel operation. This program caters to participants at all stages of their professional journey, and it focuses on paralleling gen-set controllers including InteliGen 1000.

We advise all participants to complete the Single Gen-set Controllers Training prior to enrolling in this program.

InteliGen

2 days 1 / 6 spots left

Darwin

English

Power Generation

Paralleling Gen-set Controllers Training

Location: Darwin

Training fee: 960 AUD per person, excluding GST

Capacity: 6 participants

The Paralleling Gen-set Controllers training takes a comprehensive approach, addressing complex configurations involving multiple generators in island or parallel operation. This program caters to participants at all stages of their professional journey, and it focuses on paralleling gen-set controllers including InteliGen 1000.

We advise all participants to complete the Single Gen-set Controllers Training prior to enrolling in this program.

InteliGen

InteliGen

2 days 1 / 6 spots left

Oldbury

English

Power Generation

InteliGen 1000 & InteliConfig Familiarization (face-to-face course)

Location: ComAp Control Limited, Unit 1B, Swallowfield Courtyard, Wolverhampton Road, Oldbury, West Midlands, B69 2JG

Training fee: £200 per person

Capacity: 6 participants

Learn how to master ComAp´s advanced paralleling controller for complex applications, the InteliGen 1000. During the course, participants will explore the functuonalities and unique features of the InteliGen 1000 controller, and its integration with the InteliConfig configuration software.

This hands-on training will help you get a practical experience in configuring, monitoring, and optimisng the performance of the InteliGen 1000 controller using our intuitive and easy-to-use software InteliConfig. Through practical applications and real-world scenarios, the participants will gain valuable insights into maximising the potential of this advanced paralleling controller.

InteliGen, InteliMains 1010, InteliMains 1010 SC

2 days 1 / 6 spots left

Adelaide

English

Power Generation

Paralleling Gen-set Controllers Training

Location: Adelaide

Training fee: 960 AUD per person, excluding GST

Capacity: 6 participants

The Paralleling Gen-set Controllers training takes a comprehensive approach, addressing complex configurations involving multiple generators in island or parallel operation. This program caters to participants at all stages of their professional journey, and it focuses on paralleling gen-set controllers including InteliGen 1000.

We advise all participants to complete the Single Gen-set Controllers Training prior to enrolling in this program.

InteliGen

InteliGen, InteliMains 1010, InteliMains 1010 SC

Paralleling Gen-set Controllers Training

Location: Brisbane

Training fee: 960 AUD per person, excluding GST

Capacity: 6 participants

The Paralleling Gen-set Controllers training takes a comprehensive approach, addressing complex configurations involving multiple generators in island or parallel operation. This program caters to participants at all stages of their professional journey, and it focuses on paralleling gen-set controllers including InteliGen 1000.

We advise all participants to complete the Single Gen-set Controllers Training prior to enrolling in this program.

InteliGen

2 days 6 / 6 spots left

Oldbury

English

Power Generation

InteliGen, InteliMains 1010, InteliMains 1010 SC

4 days 7 / 18 spots left

Prague

English

Power Generation

Single & Gen-set Controllers Training

Location: Prague 7, U Uranie 1612/14a, 17000, Czech Republic

Training fee: 220 EUR per person per day

Capacity: 18 participants

Single Gen-set Controllers Training

First part of our training will provide the necessary resources to learn all about working with ComAp controllers and efficiently managing power systems for both newcomers seeking foundational insights and seasoned professionals aiming to fine-tune their skills. Engaging in collaborative learning experiences and hands-on practice, the participants will gain confidence in navigating the complexities of working with our InteliLite 4 family of controllers.

Paralleling Gen-set Controllers Training

Second part of the training takes a comprehensive approach, addressing complex configurations involving multiple generators in island or parallel operation. This program caters to participants at all stages of their professional journey, and it focuses on paralleling gen-set controllers including InteliGen 4 200, InteliGen 500 G2 and InteliGen 1000.

InteliLite, InteliGen, InteliNano, InteliSys

2 days 6 / 6 spots left

Oldbury

English

Power Generation

InteliGen, InteliMains 1010, InteliMains 1010 SC

4 days 12 / 18 spots left

Prague

Czech

Power Generation

Single & Paralleling Gen-set Controllers Training

Místo konání: U Uranie 1612/14a, Praha 7, 17000, Czech Republic

Cena: 180 EUR/osoba/den/cena bez DPH

Kapacita: 18 účastníků

Single Gen-set Controllers Training

První část školení je zaměřena na kontrolery ze skupiny InteliLite 4 .

Účastníci se seznámí se základy řízení samostaných motorgenerátorů v ostrovním režimu nebo v zapojení paralelně se sítí.

Paralleling Gen-set Controllers Training

Druhá část školení je zaměřena na InteliGen 4 200, InteliGen 500 G2 a InteliGen 1000 kontrolery.

Účastníci budou seznámeni se základy komplexních zapojení využívajících několik gen-setů v ostrovním provozu nebo zapojených paralelně k síťovém provozu.

Po dokončení tohoto školení budete vědět, který výrobek společnosti ComAp vybrat, kde najít podrobné informace o používání produktu a jak nastavit řídící jednotku. Dále také získáte znalosti o rozšíření možností řídící jednotky pomocí příslušenství řídící jednotky ComAp, včetně informací o systémech vzdáleného monitorování a řízení.

InteliLite, InteliNano, InteliGen, InteliSys

Webinar Recordings

Related case studies

Case Studies

CHP Control for a Slovak Heating Plant

18 Jan 2022

2 min

Case Studies

Backup Power for a Beverage Factory

21 Jun 2021

1 min

Case Studies

Backup Power for a Smart City

10 Jun 2020

1 min

What our customers say

Bahadir Celim, Managing Director

When the world’s spotlight is on us we need to be certain the lights stayed on! ComAp provides a complete and reliable service so that we’re always in control of the power being generated. The reliability of the paralleling capability and the overall controller flexibility, including the ability to customize screen information are invaluable tools in the successful delivery of key infrastructure for one of the most logistically challenging events in the world of sport.

Local support you can count on

Your operations depend on everything running smoothly. Our experts are here to make sure of that. We offer:

24-hour support on working days
Local contacts in 179 countries
Remote and in-person trainings and a range of support materials
Expert consultation, troubleshooting, and much more

CONTACT TECHNICAL SUPPORT

Contact your local ComAp representative

Didn't find what you were looking for? Contact us, we’ll be happy to answer any questions you may have and help you with your business needs.

See Local Contacts

Interested in another country? Find your local representative.

You might also need

InteliMonitor

WinScope

GenConfig

GenConfig is an intuitive software tool that enables quick and effective configuration and programming of IG/IS-NT controllers.

Alternative products

InteliGen NT

InteliGen NT BaseBox

InteliSys NTC BaseBox

Our website uses cookies and similar technologies to provide you the best experience and to understand how you use our site.

You may either „Accept all“ by which you agree with using functional, analytical and marketing cookies. By pressing „Revoke“ only necessary cookies shall be allowed to enable the website and applications function correctly. To revoke your consent you can do it from footer menu in Change cookie preferences section.

You can find more information on the Cookie page and the Privacy section .