IC-NT RD

The InteliGen 1000 offers: 

• New CAN FD inter-controller communication standard enabling cooperation with up to 64 additional gen-sets/mains/tie controllers
• Keeping your business and data as safe as possible, meeting the ISA 62443 level 2 - level 3 security requirements
• Hot-swap redundancy enabling a redundant unit to take over in case the primary controller fails, helping to minimise solution downtime* 
• CAN bus redundancy ensuring that a redundant CAN line be created and take over in case of CAN failure*
• Modbus Client which can initiate Modbus communication and control 3rd party devices* 
• Large built-in PLC ComAp has integrated Programable Logic Controller tightly with our standard line of controllers.
  This helps our customers to cut costs, minimise points of failure for advanced systems, and overcome any challenge that may occur.interpreter with the use of ComAp's free PLC Editor
• Compatible load/VAr sharing and power management with other ComAp solutions
• Dynamic spinning reserveDynamic Spinning Reserve allows the system to react flexibly to changes in power produced by renewable energy sources.
  ComAp controllers can react to requested spinning reserve and keep the sufficient amount of gen-sets running to cover the drop-in output of the renewable source (e.g. when cloud cover is heavier).  helping to deliver maximum amount of available energy from photovoltaics
• Multi ECU (Electronic Control Unit) enabling communication with more independent J1939 devices such as Engine Control Unit, AVR modules, Breaker, etc. 
• Built-in CAN bus logger and event-based history for easy and fast troubleshooting
• User-defined protections and setpoints on top of default protection
• AirGateComAp’s controllers incorporate AirGate connection technology to make access to the internet as simple as possible.
  AirGate enables our controllers to connect to the internet using the existing network infrastructure, negotiating firewalls and VPN systems and removing the requirement for static and public IP addresses. 2.0 for easy connection to your equipment remotely, without worrying about your asset’s IP address
• More precise measuring with a True Root Mean Square measurement feature
• Remote control and monitoring of your gen-set operations with WebSupervisor, our cloud-based fleet management tool
• Secure user management
• Droop regulation allowing load and Var sharing when the inter-controller’s communication is lost
• Peak shaving for limiting the import from the mains (e.g. due to higher prices)
• Load shedding ensuring the most important loads are running even when there is a lack of power
• Start-up synchronisationComAp’s Start-up synchronisation eliminates any blackout time, and the start-up time is the same for sites running 2, 10, or even 30 gen-sets.
  To avoid delaying availability of the system due to slow-starting generators or other problems, any engines that fail to reach running speed with a specified time are rejected from the scheme and, if able, are left to perform traditional synchronising after the majority of sets have become available. to minimise the paralleling start sequence time and get the gen-set system up and running with minimum possible delay
• Automatic Mains Failure that ensures automatic start of gen-sets and minimises downtime
• A wide range of plug & play displays with automatically generated content that can be easily edited in our free Screen Editor or InteliSCADA