ComAp has recently received the opportunity from ZECO, a globally renowned Italian manufacturer of turbines for hydroelectric power plants, to implement automatic control on a hydro-electric turbine that should power a local hospital in the Himalayas. At more than 2500 meters altitude, this hospital serves as the main hospital of the local mountain camp base. 

One of the main challenges was that the system is completely stand-alone, even without a connection to the mains. The turbine is driven by water from a small reserve lake. The system starts working when the operator manually opens the water valve, which performs the first revolutions on the generator. When the turbine is spinning at the correct RPM, it can provide residual voltage to power the devices involved, even the ComAp controller.

The other great challenge was to regulate frequency of the generator with no auxiliary control of the water valve. To accomplish this, we installed a resistive load bank that dissipates exceed load to maintain the correct frequency of the electrical system. We chose our InteliSys NTC BaseBox controller as the best fit for this application, as the immediate speed control and the instant voltage and frequency data enable inserting the resistance load command in the quickest way possible.

The InteliSys NTC BaseBox controller is accompanied by ComAp´s WebSupervisor for remote management and monitoring of the system.