InteliMains 210

Order code: IM3210XXBAA

InteliMains 210 is a secure mains supervision controller for synchronising sets of gen-sets to the mains/utility source. The controller can also be used for tie-breaker operation and is compatible for switchgear and standard applications.
 
  • Built-in PLC interpreter
  • Compatibility across the portfolio
  • Remote connection and monitoring
  • Plug-in modules
  • One hardware for more applications 
    InteliMains 210

The InteliMains 210 offers: 

  • Support for installations with the option for cooperation with up to 32 gen-sets/mains/tie controllers
  • Built-in PLC interpreter with the use of ComAp's free PLC Editor for easy configuration
  • AirGateComAp’s controllers incorporate AirGate connection technology to make access to the internet as simple as possible.
    AirGate enables our controllers to connect to the internet using the existing network infrastructure, negotiating firewalls and VPN systems and removing the requirement for static and public IP addresses.
    to connect to your equipment remotely, without worrying about your asset’s IP address
  • Remote control and monitoring of your gen-set operations with WebSupervisor, our cloud-based fleet management tool
  • Compatible load/Var sharing and power management with other ComAp solutions
  • A wide range of plug-in modules allowing you to easily extend the functionality of the controller
  • One hardware for more applications, enabling an easy switch between MCB, MGCB and BTB applications
  • Event-based history for fast and easy troubleshooting
  • Peak shaving for limiting the import from the mains (e.g. due to higher prices)
  • Load shedding ensuring the most important loads are running even when there is a lack of power

Frequently Asked Questions

Can I unlock my controller?

If you have forgotten your controller password, it can be found using the password decode function.

You will need the following information about your device:

  • serial number
  • "password decode" number
Both numbers can be obtained through the monitoring software relevant to the device.
  • Serial number is available in Controller info
  • Password decode number is available in Values / Info

You can also show these numbers on your device's display. Typically, this requires a sequence or combination of buttons to be pressed. Details can be found typically in the device Operator guide.

Once you have these numbers, please contact your ComAp distributor and they will help you get your password back.

 

Do you support communication to (IVECO, Cummins, MAN, VOLVO, etc.) ECUs?

Yes, ComAp devices are capable of communication with electronic engine control units (ECUs) from the majority of engine manufacturers.

Typically, you connect the ECU directly to the controller using CAN bus. If the ECU does not support the J1939 communication protocol you need to use a communication interface either on the ECU side (such as SAM CCB2 or SmartConnect modules) or on the ComAp side using the I-CB communication bridge.

The communication is typically bi-directional so we support reading of values from the ECU as well as sending commands to the ECU (Start, Stop, etc) and controlling the engine RPM.

For details including physical connection, configuration steps and troubleshooting help please consult the Electronic Engines Support Guide available on this website.

Firmware and archive/configuration upgrade in ComAp controllers.

Each ComAp controller needs firmware and configuration for its operation.
  • Firmware (FW) = operation system of the unit.
  • Configuration (also called Archive) = application settings/parameters and functions, IOs definition, PLC, ECU, etc. It also contains history log saved from monitoring software (InteliMonitor, LiteEdit, InteliConfig).

New FW (together with default Archives) can be obtained from product page on our website or using the InteliBot’s Download section. After download, you can double click on the file (typically *.psi or *ixc) to import all needed files into your library (in your computer - see below where you can find it). By using configuration tools (such as GenConfig, DriveConfig, InteliConfig, LiteEdit) you can also upgrade the FW of your controller (you need to be connected to that controller, it is recommended over cable).

Default application files are available:
  • directly in InteliConfig „New configuration“ window
  • (typically) C:\Users\Public\Documents\ComAp PC Suite\GenConfig\Archives\Default (or DriveConfig) folder for InteliGen and InteliSys NT units.
If you want to change your IGS-NT unit from SPtM to MINT application, you can simply choose this default file in the configuration SW and write it into the unit.
FW and configuration file version has to match,  (e.g. 4.1.x FW version, you need 4.1.x archive version – 3.9.x would not be allowed to be written into the unit). Configuration/Archive files are usually upgradeable using our SW Tools (GenConfig, DriveConfig, InteliConfig).

We do recommend to use for every new project the newest FW that is available.  In case that you miss or you are not satisfied with some features, you can also upgrade the FW and the archive the newest version.
 

How do I change the controller firmware? Where can I get the latest firmware?

You can download the latest firmware package on the webpage of the device. You can easily navigate there through the ‘Products’ section or just use the Search function. If you cannot find the firmware on the website or if you require different than the offered version do not hesitate to contact our support team.

The firmware upgrade itself is easy to perform. You need the appropriate configuration software and a connection to the controller (preferably a direct connection). Prior to initiating the update process, we strongly recommend you to save a complete backup of your device.

It usually consists of several steps:
  • Create a controller back up.
  • Update the device firmware. It will contain default Configuration Archive and default Application.
  • Change the Application (SPtM, MiNT, MCB, MGCB, BTB, etc) to the required type (by programming appropriate default archive to the controller).
  • Use the Import Configuration Wizard to restore your previous configuration. In some cases manual interventions might be needed during this step.
  • Optional: Update the connected display firmware or device communication module firmware.
Should you be unsuccessful in programming the new version, the rollback procedure is to install previous firmware version and use your back up to restore the controller to its original state before the firmware upgrade was attempted.

How do I connect to my ComAp controller? What types of connections are supported?

ComAp offers a wide range of options to connect to your controller:

  • RS232 / RS485
  • USB - USB A<->B (usually a printer cable)
  • Internet connection - LAN, GPRS, 3G, 4G

Note that some connection types require you to use a communication module (plug-in eg a RS232 card) or communication bridge (external device eg Internet Bridge NT).

Each ComAp device usually allows for multiple ways of connection. The simplest one supported by the majority of our devices is the RS232 (serial) connection. For this, you need an RS232 cable (null modem) and if your PC is not equipped with an RS232 port you need a USB<->RS232 converter.
USB connections are very common. Almost all ComAp devices support connection using simple USB A<->B cable (printer cable) for easy configuration. Some devices can be powered from the USB port for programming to allow easy configuration right on your desk.
Other connection types: Internet connection (LAN, GPRS, 3G, 4G), Modbus RTU, Modbus TCP, SNMP, AirGate, Modem.
Note that some connection types require you to use a communication module (plug-in eg a RS232 card) or communication bridge (external device eg Internet Bridge NT). Not all types of connection are possible on each device. You can find all the details related to this topic in your device's Comprehensive guide or Communication guide.
 
Detailed information about connection to:
InteliLite NT, InteliATS NT, InteliCompact NT is available IL-NT, IA-NT, IC-NT Communication Guide (page 21)
InteliGen-NT, InteliSys-NT, InteliMains-NT is available in IGS-NT Communication Guide (page 19)
InteliLite is available in Global Guide InteliLite AMF25 Global Guide (page 126)

 

Local support you can count on

Your operation depends on everything running smoothly. Our experts are here to make sure of that. We offer:

  • 24-hour support on working days
  • Local contacts in 179 countries
  • Remote and in-person trainings and a range of support materials
  • Expert consultation, troubleshooting, and much more

Contact your local ComAp representative

Didn't find what you were looking for? Contact us, we’ll be happy to answer any questions you may have and help you with your business needs.

Interested in another country? Find your local representative

Our website uses cookies and similar technologies to provide you the best experience and to understand how you use our site.

You may either „Accept all“ by which you agree with using functional, analytical and marketing cookies. By pressing „Revoke“ only necessary cookies shall be allowed to enable the website and applications function correctly. To revoke your consent you can do it from footer menu in Change cookie preferences section.

You can find more information on the Cookie page and the Privacy section .