You need an account to access this content
Create a free account and get access to all downloads and more!
Microgrid Controllers Advanced Hands-on Training
Face-to-face course
Microgrid Controllers Hands-on Training
Location: Prague 7, U Uranie 1612/14a, 17000, Czech Republic
Training fee: 330 EUR per person per day
Capacity: 12 participants
Transitioning to more sustainable energy sources is on top of the power generation and energy management agenda. Our specialised training program is designed to help you get a comprehensive understanding of hybrid microgrids and ComAp´s advanced control systems that can help simplify their operation, control and monitoring.
At the outset of the hands-on training, participants are provided with a real-life project and clearly defined specifications. Throughout the course, they will collaboratively work on the project, and upon completion, they will conduct thorough testing and commission the final solution.
We highly recommend completing our Paralleling Gen-Set Controllers or Hybrid Microgrid Controllers Basic training or having prior experience with our products before enrolling in the Hybrid Microgrid training. The knowledge covered in either of these trainings is crucial for understanding of the Hybrid Microgrid Advanced training content.
Location: Prague 7, U Uranie 1612/14a, 17000, Czech Republic
Training fee: 330 EUR per person per day
Capacity: 12 participants
Transitioning to more sustainable energy sources is on top of the power generation and energy management agenda. Our specialised training program is designed to help you get a comprehensive understanding of hybrid microgrids and ComAp´s advanced control systems that can help simplify their operation, control and monitoring.
At the outset of the hands-on training, participants are provided with a real-life project and clearly defined specifications. Throughout the course, they will collaboratively work on the project, and upon completion, they will conduct thorough testing and commission the final solution.
We highly recommend completing our Paralleling Gen-Set Controllers or Hybrid Microgrid Controllers Basic training or having prior experience with our products before enrolling in the Hybrid Microgrid training. The knowledge covered in either of these trainings is crucial for understanding of the Hybrid Microgrid Advanced training content.
Agenda
DAY 1
DAY 2
DAY 3
| 09:00 - 12:00 | Hybrid Microgrid overview & Project introduction IIntroduction to Hybrid microgrids, products and applications. InteliNeo 5500/6000 functions (SOC management, Power control, curtailment, ...). Real HMG sites with InteliNeo. Meeting the project specifications, SLD and requirements. Project design part - group workshops (brainstorming about configuration and controllers selection). |
| 12:00 - 12:45 | Lunch break |
| 12:45 - 16:00 | Basics of Configuration Brief commissioning of InteliMains, InteliGen controllers. Introduction to the loadsharing with InteliMains and shared signals. StarterKit hands-on. |
DAY 2
| 09:00 - 12:15 | Basics of Configuration InteliNeo functions, Logical Analog/Binary function (LAI, LBI) and setpoints. Modbus master function, definition of modbus registers and testing. |
| 12:15 - 13:00 | Lunch break |
| 13:00 - 16:30 | BESS Commissioning Commissioning of BESS, start/stop, P/Q values, power control, modbus mapping. Group workshops for brainstorming and practical tasks. |
DAY 3
| 09:00 - 12:15 | BESS Commissioning & PV Commissioning Commissioning of BESS, start/stop, P/Q values, power control, modbus mapping. Group workshops for brainstorming and practical tasks. Commissioning of PV, reading PV values, curtailment output and modbus mapping. |
| 12:15 - 13:00 | Lunch break |
| 13:00 - 16:00 | Final testing & test/feedback Testing scenarios according to the project requirements. Final test and collecting feedback |