Announcement

ComAp Models Suite – PowerFactory: Ready-made controller models

18 Nov 2026

5 min read

ComAp launches the new ComAp Models Suite, a set of encrypted simulation models for ComAp’s most advanced controllers, this time kickstarting with a package for the PowerFactory simulation software by DIgSILENT. Released are models of InteliGen 1000, InteliMains 1010, InteliSys 2000, InteliNeo 6000 and InteliNeo 5500. Software models give system integrators, plant owners and grid-study consultants the piece that has been hardest to model: the control system. With it, they can build the plant dynamic model needed for grid operators, for utility-scale power plant simulation, for islanded systems, or for power plant recertification.

Why are controller models on demand?
Before a power plant may connect to the grid, its owner must prove that it meets the grid code of a particular country – by tests, certificates and, more and more often, by simulation. Larger plants must deliver a simulation model of the whole plant: cables, transformers, generators, batteries, PV, and controllers. The ComAp Models Suite is certified against VDE-AR-N 4110 as its primary reference and can also support other RfG-based (EU regulation for grid code connection of generators) codes.

Grid connection is not the only use case. Utility-scale projects of tens of megawatts on a high-voltage grid need the plant proven before it is built. Operators also use models to study how an islanded network behaves when cut off from the larger grid. In the future, models should make recertification easier when a controller on an already certified plant is replaced.

Benefits of software models

  • Faster approval – no rebuilding of controller logic from documentation
  • Lower study cost – the consultant works with ready-made blocks
  • Confidence – behaviour consistent with the real ComAp controller
  • One supplier for the controller and its model

Who are software models for?

  • System integrators that build grid-connected plants and must deliver the plant model
  • Gen-set packagers and OEMs whose customers ask for models of larger, grid-parallel projects
  • Developers and plant owners for whom grid connection approval is on the critical path
  • Grid-study consultants – the people who work with the models

Availability and other software support
PowerFactory is the first software tool supported. PSS®E and PSCAD models are planned for release in 2027.
The ComAp Models Suite is available from 18 November and supplied on customer request.

Our website uses cookies and similar technologies to provide you the best experience and to understand how you use our site.

You may either „Accept all“ by which you agree with using functional, analytical and marketing cookies. By pressing „Revoke“ only necessary cookies shall be allowed to enable the website and applications function correctly. To revoke your consent you can do it from footer menu in Change cookie preferences section.

You can find more information on the Cookie page and the Privacy section .