ComAp - Our products

Products

Market-leading smart control solutions for power generation and energy management. Our wide portfolio of products, software and accessories can be used in all industries for various applications, from ensuring more sustainable power generation, hybrid energy management, supporting mission critical power, CHP and bi-fuel applications, to ensuring reliable Marine power management and engine control, energy market integration, and remote control and monitoring of your equipment.

Controllers

Remote Displays

Switchgear Control and Protections

Software Tools

Communications

Accessories

Enclosed Solutions

Extended Features

Controllers

Complex or simple installations, hybrid microgrids or standby, marine or land-based, our controllers can help you manage your energy installations simply and effectively anytime, anywhere.

Show all 70

InteliNeo 6000

InteliNeo 6000 is a controller for managing and optimising on-grid and off-grid hybrid microgrid systems. The controller features real-time monitoring capabilities to balance power supply and demand and make real-time decisions for optimal energy management.

InteliGen 1000

InteliGen 1000 is the most advanced ComAp gen-set controller for multiple gen-sets with paralleling operations, with or without connection to the mains or other source. Intended primarily for switchgear applications, this high-end controller will help you control and monitor demanding projects with critical infrastructures such as datacentres, hospitals and banks.

InteliGen 1000 SC

The InteliGen 1000 SC is a state-of-the-art paralleling controller for synchronising as well as load/var control. This controller is intended for applications where system control is driven either from panel switches or from an upper- level device such as a system PLC. In addition, this controller can communicate with an engine ECU to read engine specific values and providing generator protections if required. The Inteligen 1000 SC is simple to configure and operate which will reduce engineering and commissioning times.

InteliGen 500 G2

InteliGen 500 G2 is a paralleling controller with 5" colour display for advanced and more complex diesel gen-set applications, supporting both single and multiple gen-sets running in grid-tied or island operations.

InteliNeo 5500

The InteliNeo 5500 is a microgrid controller that offers a cost-effective solution for combining traditional grid or gen-sets with renewable energy sources to create a reliable and efficient power generation system. The panel-mount design with a 5” colour TFT display is suitable for packagers and integrators who are looking to integrate clean and sustainable energy to existing power generation sites.

InteliNeo 530 BESS

The InteliNeo 530 BESS is an advanced energy management system providing secure and reliable control and monitoring for battery energy storage systems (BESS) to ensure the highest level of Storage System performance. Designed to respond to the needs of BESS packagers, it enables direct integration of the Battery Management System (BMS) with the Power Conversion System (PCS) within a BESS, as well as control, monitoring and protection of the auxiliary systems.

InteliGen 500

InteliGen 500 is a paralleling controller with 5" colour display for advanced diesel gen-set applications, supporting both single and multiple gen-sets running in grid-tied or island operations.

Extended Feature - InteliGen 500 Microgrid

InteliGen 500 Microgrid is a new solution for complete microgrid control. The system ensures full control of the energy resources in your microgrid, efficient energy management and remote monitoring. The solution is a combination of the InteliGen 500 gen-set controller, a custom microgrid ComAp firmware upgrade activated by a software key and an InteliFieldbus Gateway for interaction with third-party products, including solar inverters.

Discontinued

InteliGen 200

InteliGen 200 is a gen-set control unit for common paralleling applications, supporting both single and multiple gensets running in grid-tied or island operations.

InteliGen 1000 Marine

The InteliGen 1000 Marine is an advanced marine controller for managing and optimising onboard AC and DC power management systems. Setting a new standard in the marine industry, the InteliGen 1000 Marine can control and monitor different power sources in real time and manage their cooperation based on different requirements. The controller has pre-programmed applications and compatibility with Modbus devices, which ensures quick integration and easy commissioning of marine projects.

Remote displays

ComAp's range of displays gives you a variety of options for monitoring and managing our controllers. From a simple, LED based display, right up to a 18,5'' touch screen, there is a ComAp display for every application.

Show all 15

InteliLite 4 Remote Display (SW)

InteliLite 4 Remote Display (SW) is a remote display software for InteliLite 4 controllers, acting as a remote display for InteliLite 4, InteliATS2 or InteliGen4 200 controllers. The remote display provides the same controls and shows the same gen-set related data as the connected controllers.

InteliVision 18Touch G2

Easy to install, configure and use, the InteliVision 18Touch G2 provides comprehensive overview and monitoring of your complex installations. A new generation of our InteliVision 18Touch, this display will support your control and monitoring needs for sites with multiple controllers and complex installations, such as CHP or Hybrid that need to monitor a large number of values. The product comes with embedded InteliSCADA software, ComAp's PC monitoring and management tool, enabling easy screen configuration, history check and change of setpoints from a single location.

Discontinued

InteliVision 18Touch

Get a comprehensive overview of your complex operations for any application with the InteliVision 18Touch remote display. Easy to install, configure and use, this 18,5“colour touchscreen display unit will support the control and monitoring of sites with multiple controllers and complex installations, such as CHP or Hybrid that have a large number of values that need to be measured. The InteliVision 18Touch comes with embedded PC Scada software enabling users to freely configure their screen with different types of items such as meters, bar graphs, numeric values, control buttons, pictures, etc.

InteliVision 13Touch

InteliVision 13Touch is a high-quality and easy-to-use 13.3" marine-certified panel PC with multi-controller support and buttons for brightness change on its front face. Developed for simultaneous monitoring and control of up to four controllers, the InteliVision 13Touch is flexible and simple to configure to suit your monitoring needs.

InteliVision 12Touch

Intuitive, easy-to-use and simple to configure, the InteliVision 12Touch is an industrial operator panel equipped with 12.1” colour, multi-touch screen. Compatible with the majority of ComAp’s controllers, it provides comprehensive visual overview to monitor and control single gen-sets for various applications.

InteliVision 12Touch OEM

Intuitive, easy-to-use and simple to configure, the InteliVision 12Touch OEM is a marine-certified industrial operator panel equipped with 12.1” colour, multi-touch screen. Compatible with the majority of ComAp’s controllers, it provides comprehensive visual overview to monitor and control multiple gen-sets and engines for various applications.

InteliVision 10Touch

Intuitive and easy to use, the InteliVision 10Touch is a high-quality PC panel designed for a broad range of ComAp’s paralleling and single gen-set controllers for various applications. This 10.1” multi-touch display comes with embedded InteliScada display, our signature PC monitoring tool, enabling easy monitoring and simple screen configuration to meet your needs.

InteliVision 5.2 Marine

InteliVision 5.2 Marine is an easy-to-use remote colour display for ComAp marine controllers, for monitoring and control of various marine applications. This intuitive plug&play solution provides comprehensive visual overview of all application data, monitoring information and trend history. The display is marine certified.

InteliVision 8

InteliVision 8, industrial operator panel equipped with 8” colour screen, is designed to support the monitoring and control of single gen-sets’ operations for various applications. A simple and easy-to-use plug&play solution, it provides comprehensive overview of all engine data, monitoring information and trend history. The InteliVision 8 is intended for the ComAp InteliGen NT, InteSys NT, InteliMains and InteliDrive family of controllers.

InteliVision 8 Marine

InteliVision 8 Marine is an industrial operator panel equipped with 8” colour screen, certified for use in the marine industry to support the monitoring and control of single gen-sets’ operations. A simple and easy-to-use plug&play solution, it provides comprehensive overview of all engine data, monitoring information and trend history. The InteliVision 8 Marine is intended for the ComAp InteliGen NT, InteSys NT, and InteliDrive family of controllers.

Switchgear control and Protections

Switchgear and protection controllers essential for all applications where generators operate in parallel with the mains.

Show all 18

InteliMains 1010

InteliMains 1010 is the most advanced ComAp mains/utility/tie-breaker supervision controller for complex applications. Designed following top IT security standards to protect your operations, the InteliMains 1010 acts as a relay for mains protection and helps synchronise your gen-sets to the mains/utility for switchgear applications and critical infrastructure installations, such as datacentres, hospitals or banks.

InteliMains 1010 SC

The InteliMains 1010 SC is designed for Utility and Tie Breaker points of connection for complex paralleling application to provide system synchronising, load and var/pf control. This controller is intended for applications where system control is driven either from panel switches or from an upper- level device such as a system PLC. The InteliMains 1010 SC can also be programmed to allow another level of system electrical protections. This device is simple to configure and and operate, which will reduce engineering and commissioning times.

InteliMains 510

InteliMains 510 is the mains supervision controller used for synchronising set of gensets to the Mains/Utility or bus-tie-breaker operations, primarily intended for switchgear and targeting advanced and more complex applications.

InteliMains 210 G2

InteliMains 210 G2 is the mains supervision controller used for synchronising a set of gen-sets to the Mains/Utility or bus-tie-breaker operations, primarily intended for standard switchgear applications.

InteliMains 210

InteliMains 210 is a secure mains supervision controller for synchronising sets of gen-sets to the mains/utility source. The controller can also be used for tie-breaker operation and is compatible for switchgear and standard applications.

InteliMains NT BaseBox

InteliMains NT BaseBox is a Mains/Utility/Tie-breaker supervison controller base unit. Acting as the Mains protection relay, the InteliMains NT BaseBox synchronises sets of gen-sets to the Mains/Utility and it is primarily intended for switchgear applications and complex, critical infrastructure installations, such as datacentres, hospitals or banks. This product is an earlier generation of the InteliMains 1010 controller.

InteliMains NT

Designed with a built-in display, the InteliMains NT GC is a mains/utility/tie-breaker supervision controller. Acting as a mains protection relay, the InteliMains NT GC can synchronise set of gen-sets connected to the Mains/Utility source. The controller is intended primarily for switchgear applications.

InteliMains NTC BaseBox

InteliMains NTC BaseBox is a Mains/Utility/Tie-breaker protection and supervision controller with extensive communication capabilities. Acting as a Mains protection relay, the InteliMains NTC BaseBox synchronises sets of gen-sets to the Mains/Utility source. This product is an earlier generation of the InteliMains 1010 controller and it is intended for switchgear applications and complex, critical infrastructure installations, such as datacentres, hospitals or banks.

InteliMains GSC

InteliMains GSC is mains/utility/tie-breaker protection and supervision firmware with extensive communication capabilities. Acting as a mains protection relay and compliant to the latest international grid codes, the InteliMains GSC synchronises sets of gen-sets to the Mains/Utility source. Part of the ComAp GSC family and an earlier generation of the InteliMains 1010 controller, this firmware is intended for switchgear applications and complex, critical infrastructure installations, such as datacentres, hospitals, or banks.

Discontinued

MainsCompact NT

Mains Controller for InteliCompact NT MINT gen-set controllers.

This product is not in our standard production since January 1st 2021. Regular production of this product is terminated and availability not guaranteed. Refer to your sales representative for more information.

Communications

A wide range of communication modules to help simplify your connection to controller and authorised personnel for monitoring and maintaining your equipment.

Show all 28

RUT955 EMEA

This cellular router enables one or multiple ComAp controllers equipped with Ethernet interface to be able to communicate remotely via internet and access cloud services like WebSupervisor.

CM2-4G-GPS

An easy-to-use and highly efficient solution for connecting gen-set controllers online via 4G network. Enables remote monitoring and tracking of the gen-set’s exact position, helping to optimise its uptime and reduce maintenance costs.

CM3-Ethernet

An easy-to-use communication solution to help connect gen-set controllers online via wired connection. This plug-in communication module enables remote monitoring and control for the gen-set controllers and provides access to various gen-set values - engine values, generator, load and Mains electrical values - alarms and history from anywhere.

CM-4G-GPS

CM-Ethernet

Cellular Router

This cellular router enables one or multiple ComAp controllers equipped with Ethernet interface to be able to communicate remotely via internet and access cloud services like WebSupervisor.

CM-GPRS

An easy-to-use communication solution to help connect single and paralleling gen-set controllers online via GPRS and GSM communication.

CM-RS232-485

Communication module enabling integration of genset controller into the local monitoring system over Modbus RTU and a quick connection to ComAp software tools for configuration and monitoring InteliConfig and InteliSCADA.

InteliGateway 301

InteliGateway 301 is a versatile gateway module that seamlessly connects multiple Modbus devices to ComAp’s WebSupervisor and InteliScada monitoring systems, as well as to ComAp's controllers. This gateway product is enhanced with new features such as 4G cellular connectivity and GNSS capability.

InteliGateway 101

InteliGateway 101 is a versatile communications gateway that seamlessly connects multiple Modbus devices to ComAp’s WebSupervisor and InteliScada monitoring systems. This gateway product is enhanced with new features such as 4G cellular connectivity and GNSS capability.

Enclosed Solutions

Fully integrated and pre-built control panel solutions for Hybrid, Marine and Power Generation installations. Designed, built, wired, compliant to relevant international standards, installed and commissioned using our 30+ years expertise and experience in the industry.

Show all

Accessories

A comprehensive family of extension modules and control accessories that bring greater scope and flexibility to our control products, and will help you custom design control systems to meet individual project requirements.

Show all 84

Gasket IN2

Gasket accessory for InteliNano AMF 5. This optional Gasket IN2 ensures IP65 protection when the controller is panel-mounted.

Gas Train 65

The Gas Train is designed to reduce pressure and to control the flow rate of natural gas flowing into the combustion engine. It is suitable mainly for bi-fuel conversions as a part of the bi-fuel solution.

Inteli DC4/4 (non-UL)

Inteli DC4/4 is an extension module, type transducer, equipped with analog inputs and analog outputs. The module can be used with various types of controllers, purposed for applications where we need to precisely measure the direct voltage and direct current (DC Voltage, DC Current).

The specific Inteli DC4/4 accessory is not UL certified. The UL certified version will be available shortly.

EM-BIO8-EFCP

Binary I/O plug-in module with earth fault current protection measurement.

Inteli AIN8

Module with 8 analogue Input channels and 1 RPM/Impulse Input.

Inteli IO8/8

Binary Inputs/Outputs and analogue Outputs module.

Inteli AIN8TC

Peripheral module, extension module - 8 thermocouples inputs.

Inteli AIO9/1

Analogue Input/Output module.

Discontinued

IL-NT IO1

Analogue Output and Binary Input module.

Discontinued

InteliLite NT AIO

Analogue Input/Output module.

Software Tools

Easy-to-use and intuitive software tools that will simplify the configuration and monitoring of your controllers and equipment, both on-site and remotely.

Show all 12

ComAp Design Studio

Design, Simulate, Collaborate and more with Ease!

InteliConfig

InteliConfig is an intuitive software tool enabling simple and effective configuration and commissioning of gen-set controllers and peripherals, helping you save time and optimise project costs. The tool is compatible with InteliLite, InteliGen, inteliMains, and InteliATS controllers.

WebSupervisor

WebSupervisor is a cloud-based system designed for monitoring, data analysing and management of ComAp and third-party devices. It provides you with an easy overview of all your devices, their operational status, location and other important data, and alerts you in case of potential issues. Using its powerful reporting and analysis tools, you can optimise the revenue for your gen-set fleet, minimise downtime and reduce maintenance costs.

InteliSCADA

InteliSCADA is an intuitive software tool that enables quick and simple creation and monitoring of complex Supervisory Control and Data Acquisition (SCADA) systems for controlling industrial processes. The tool can be used to monitor locally both simple and advanced paralleling sites, regardless of the type of application.

InteliMonitor

InteliMonitor is an online monitoring and controlling software tool for ComAp devices and accessories that can be used for unlimited number of sites. The tool provides auto-generated SCADA to help you gain detailed overview of your site and gen-set operations.

IGS-LOG

IGS-LOG is a software tool for continuous monitoring of ComAp controllers’ operations during a project, which displays charts of measured (on-line) or stored (off-line) values.

LiteEdit

LiteEdit is a software tool which enables intuitive full-scale configuration and monitoring of ComAp controllers through a wide variety of communication interfaces.

WinScope

WinScope is a high-performance PC tool used for monitoring and archiving trends. The tool enables quick and easy adjusting of setpoints to achieve optimal functionality and maximum performance of your gen-set. WinScope 1000 is available and can work in demo mode, free basic mode or paid advanced version, which can monitor up to 32 controllers and channels. WinScope 1000 is the newest generation of our WinScope tool.

GenConfig

GenConfig is an intuitive software tool that enables quick and effective configuration and programming of IG/IS-NT controllers.

DriveConfig

DriveConfig is an intuitive software tool that enables you to quickly and effectively configure and program your controllers. The tool is compatible with ComAp’s InteliDrive DCU Marine/Industrial, InteliDrive Mobile, InteliBifuel and InteliBifuel Mobile/Lite controllers.

Contact your local ComAp representative

Didn't find what you were looking for? Contact us, we’ll be happy to answer any questions you may have and help you with your business needs.

See Local Contacts

Interested in another country? Find your local representative.

Our website uses cookies and similar technologies to provide you the best experience and to understand how you use our site.

You may either „Accept all“ by which you agree with using functional, analytical and marketing cookies. By pressing „Revoke“ only necessary cookies shall be allowed to enable the website and applications function correctly. To revoke your consent you can do it from footer menu in Change cookie preferences section.

You can find more information on the Cookie page and the Privacy section .

Products

Controllers

Remote displays

Switchgear control and Protections

Communications

Enclosed Solutions

Accessories

Software Tools

Contact your local ComAp representative

You need an account to access this content